Read Online or Download 360 SYSTEMS DR550 Instant Replay (rapid access digital audio storage) PDF
Best nonfiction_6 books
- Quasi-One-Dimensional Conductors II [LNP 0096]
- Plant Life Mgmt - Long-Term Operation of Light-Water Reactors (IAEA TR-448)
- Categorizing Operational Radiological Wastes - IAEA TECDOC-1538
- Classical Nonintegrability, Quantum Chaos: With a contribution by Viviane Baladi
Additional info for 360 SYSTEMS DR550 Instant Replay (rapid access digital audio storage)
It is advisable to back up the contents of your hard drive using the D-NET File Transfer or the Backup/Restore procedures detailed elsewhere in this manual before you begin. CAUTION! DEFRAGMENT DISK WILL TAKE SOME TIME. FOR A HIGHLY FRAGMENTED HARD DISK, THE OPERATION MAY REQUIRE AS MUCH AS 30 MINUTES TO AN HOUR. DO NOT BEGIN THE DEFRAGMENT DISK OPERATION UNLESS YOU HAVE ADEQUATE TIME FOR INSTANT REPLAY TO REMAIN OFF-LINE. IF AT ANY TIME THE DEFRAGMENTATION PROCESS IS ABORTED, YOU MUST RECYCLE POWER (TURN THE MACHINE OFF, THEN BACK ON AGAIN) TO ENSURE PROPER OPERATION.
Press ENTER to confirm the selection. 6. Use the arrow keys to select the TRANSFERS TO ACCEPT menu item. Press ENTER and then use the arrows to select the appropriate setting: • MAIL BOX ONLY - when only mail box transfers are to be allowed. • ALL - when mail box transfers and transfers to specific locations are to be allowed. Press ENTER again to confirm the selection. 7. Press CANCEL or MENU to exit from the File Transfer Menu. The machine is now configured, and is ready to be connected to D-NET.
Optionally, press ENTER to edit the Destination Receiver name. When the name is blank the display indicates '(NONE SPECIFIED)' and the transfer can be received only by machines that have a blank receiver name. 4. 0001 (SELECTED CUT) depending on which type of destination was most recently selected. The Destination Location can be changed by pressing ENTER, followed by the up or down arrows, to select between a specific location and the mail box. The selection blinks until you press ENTER again to confirm.